| T O P I C R E V I E W |
| Telinoz |
Posted - 07/09/2012 : 15:58:04
I got a Ferrari P4/5 from Davis & Giovani.
The windscreen wiper has come off during shipping.
It is tiny!
I know a small blob of glue will do the trick, however I collect models and don't make them.
So what glue do the experts use?
One that won't create a white mess, vapour marks and dries clear.
I'm in Sydney, in case someone local can pop over and fix it for me. |
| 8 L A T E S T R E P L I E S (Newest First) |
| PeterW |
Posted - 07/11/2012 : 21:06:28
quote:
Originally posted by jaaz47
for small parts you can use diluted clear nail lacquer.
But that could potentially attack the paint or glass if it not applied carefully. A water based glue is the safest. |
| jaaz47 |
Posted - 07/11/2012 : 20:37:42
for small parts you can use diluted clear nail lacquer. |
| PeterW |
Posted - 07/10/2012 : 09:15:18
quote:
Originally posted by Anthrax
I use Micro Kristal Klear by Microscale Industries. It is white but dries clear.
Mike Schmidt
Millington, NJ
Also very good.
I was thinking of a "common" glue he could use.
I actually use a special glue for jewels that holds quite well and dries crystal clear. "Jewel-It" is the name here in the States and available at Michael s.
|
| Anthrax |
Posted - 07/10/2012 : 07:23:10
I use Micro Kristal Klear by Microscale Industries. It is white but dries clear.
quote:
Originally posted by Telinoz
I got a Ferrari P4/5 from Davis & Giovani.
The windscreen wiper has come off during shipping.
It is tiny!
I know a small blob of glue will do the trick, however I collect models and don't make them.
So what glue do the experts use?
One that won't create a white mess, vapour marks and dries clear.
I'm in Sydney, in case someone local can pop over and fix it for me.
Mike Schmidt
Millington, NJ |
| Telinoz |
Posted - 07/10/2012 : 03:04:55
Thanks everyone!
Will do soon, I have tweezers and a steady hand.
I'll find the Elmer's glue. |
| PeterW |
Posted - 07/09/2012 : 19:56:51
I prefer a curved tweezers. I never attach any fine parts by hand. It's also best to place the glue in the hole and not on the part itself.
|
| the.x.man |
Posted - 07/09/2012 : 19:05:40
Wash (and dry), your finger and thumb with something like methylated spirits before placing the wiper back in its hole - it'll reduce the risk of leaving a fingerprint on the windscreen...
In case you're unsure, Elmer's glue is just PVA (well, almost; Elmer's has a few extra additives, solvents and tackifiers), and you should be able to get that in virtually any hardware store in Oz.
Squeeze/drop a small blob onto a scrap of something and use a pin to apply a tiny drop of it from there onto the wiper mounting.
________________________________________________________
The only substitute for cubic inches is more cubic inches!
~ Max Balchowsky |
| PeterW |
Posted - 07/09/2012 : 18:18:32
The best and safest way is to use a small dab of white glue [like Elmer's] . Put on a dot and let it set for a few seconds then insert the wiper. It will dry clear and there is no danger of damaging the model.
Good luck, and make sure you hold your breath ;) |
