| T O P I C R E V I E W |
| Briface-M |
Posted - 10/11/2014 : 18:06:13
Hello everyone,
Simultaneously with building of Aston Martin DBS 1/24, and a some Renault 4L 1/24, I started this new project on this Ferrari 330P4 Spyder ...
 |
| 15 L A T E S T R E P L I E S (Newest First) |
| Briface-M |
Posted - 08/27/2015 : 12:12:58
Ready to be delivered to its new owner!
 |
| Briface-M |
Posted - 08/24/2015 : 14:36:34
Thank you for your comments .
Next models: AC Cobra and Ferrari P4 / 5
Ferrariboy, I sent you a request to add to your list on Facebook. By going in my photos albums you can see all my other achievements.
You can also enter to my Facebook page "Fabrice Maréchal Models"
This Ferrari 330P4 you see here is an order for a collector. |
| gege |
Posted - 08/24/2015 : 11:14:31
very nice Fabrice, I love this model. |
| ferrariboy |
Posted - 08/23/2015 : 18:43:03
WOW, very nice model with a lot of changes.
Do you have more Ferrari models made by yourself ?
Ferrari is the best |
| the.x.man |
Posted - 08/23/2015 : 17:12:40
Absolutelty fantastic result, Fabrice, in every aspect.
__________________________________________________
“The only substitute for cubic inches is more cubic inches!”
~ Max Balchowsky
the.x.man 1:43
|
| Briface-M |
Posted - 08/23/2015 : 16:49:20
Whew, I finally completed the construction of this Ferrari. I hope my WIP has interested you.
 |
| Briface-M |
Posted - 08/17/2015 : 10:27:33
 |
| Briface-M |
Posted - 08/13/2015 : 11:57:19
Thank you the.x.man,
Now the result with the polishing work complete.
 |
| the.x.man |
Posted - 08/07/2015 : 17:36:00
Beautiful workmanship, Fabrice (as always!).
For a while there I was thinking it would be a shame to cover up all your clever metalwork with paint - but it does look even more amazing now :o)
__________________________________________________
“The only substitute for cubic inches is more cubic inches!”
~ Max Balchowsky
the.x.man 1:43
|
| Briface-M |
Posted - 08/07/2015 : 15:12:30
Thank you for the compliment Snagy.
Here is the following of the work with sanding and polishing of the varnish with Micro-Mesh abrasive ranging from 3,600 to 12,000.
 |
| Snagy |
Posted - 08/04/2015 : 20:06:46
Wonderful work and also excellently documented with sharp photos.
I really enjoy all the stages.
Best regards-
sandor |
| Briface-M |
Posted - 08/04/2015 : 14:55:15
Thank you Gégé.
 |
| gege |
Posted - 08/01/2015 : 12:51:53
good job Fabrice ! |
| Briface-M |
Posted - 07/31/2015 : 15:36:43
The varnish "Gravity Colors" has been applied.
Preparation of varnish two components is carried out according to the instructions of "Gravity Colors".
Application made with an airbrush "Badger 150".
Air pressure at the outlet of the compressor, 1.2 bars.
Varnish spray distance, about 4 to 5 centimeters with a more or less rapid movement.
Number of layers of varnish: 4.
A first thin layer for grip. Without wishing to give his shiny to the varnish.
A second more pronounced layer to define the gloss.
A third layer to provide the final gloss.
A fourth layer to give the thickness of the varnish, which will enable the sanding and polishing of the varnish.
 |
| Briface-M |
Posted - 07/29/2015 : 15:57:58
I just finished applying the primer from the manufacturer "Gravity Colors" (Ref: GC-303). And the test of this primer is conclusive.
The result is perfect. This primer has good coverage and a very fine pigment, which is used to load certain place (to fill small defects) without giving an aspect charged the painted surface.
This primer dry pretty quickly, and her grip on the metal is exceptional.
Red is applied then sanded Micro-Mesh 4000. The application of red (basis) was made with the same success as the primer.
 |
