| T O P I C R E V I E W |
| Harm |
Posted - 12/08/2015 : 12:33:27
I just won a Ferrari 126C2 at a bargain price on Ebay.The instructions are missing, though. As the model pops up regularly on this forum I was wondering if someone can help me out with a scan of the instructions. I would be most grateful. My e-mail h.kruithof60@upcmail.nl |
| 8 L A T E S T R E P L I E S (Newest First) |
| PeterW |
Posted - 08/03/2016 : 17:27:41
FYI Bosica is retired...he will not respond ;) |
| burjdubai |
Posted - 08/02/2016 : 22:29:15
quote:
Originally posted by JAG
Some time ago I contacted Vincenzo Bosica and he was kind enough to send me an original decal sheet for the 1982 126C2, you may try to do the same.
Hi JAG, could you share with us the photos your original factory build Ferrari 126C2? Do you have the contact of Mr.Bosica? I have some questions about his works. Thanks. |
| Harm |
Posted - 12/19/2015 : 11:40:24
Thank you all who responded to my request. I have the instructions. Only thing I discovered that some parts are missing from the kit. I hope Mr Bosica is able to supply them. I sent him a letter.
Harm |
| Harm |
Posted - 12/16/2015 : 02:09:11
Thank you JAG for the suggestion. Can you send me his email address in a pm. I know there is a Facebook page under his name but as I understand that is not run by him.
Harm |
| JAG |
Posted - 12/13/2015 : 04:11:59
Some time ago I contacted Vincenzo Bosica and he was kind enough to send me an original decal sheet for the 1982 126C2, you may try to do the same. |
| 126ck |
Posted - 12/13/2015 : 02:10:49
Good Morning,
After doing a Little Research i found out that the hexcel decals should come with the sheet from the Meri Kits Superkit Ferrari 126 C2.
Otherwise why not print them yourself, there are lots of simple methods around to do that.
Best regards ! :-) |
| Harm |
Posted - 12/12/2015 : 12:27:47
Thank you Erik for your suggestion. I have Akihito's build report in PDF and the pictures of the finished result. I was thinking along the same lines. However, in the meantime a member of this forum in Germany offered to send me a scan. Great! Do you know of a source that does the decals? I ordered a set from Tameo's but would like to have the Hexcel decals on the side of the monocoque.
Harm |
| 126ck |
Posted - 12/12/2015 : 03:25:27
Hey !
i hope that you will find scans of the original instruction sheet, in 2010 i was in the same Situation as you and i built the model without the instructions but what really helped me was Akihiro Kamimuras WIP on his site gdist43.com.
Best regards from Germany,
Erik
|
