|
Note: You must be registered in order to post a reply.
To register, click here. Registration is FREE!
|
| T O P I C R E V I E W |
| flight |
Posted - 07/16/2010 : 02:54:14
Hi at all,
This model is the Ferrari that won the 2007 championship in Interlagos(Brazil)
I’ll build this model in “Garage Version”,as I did in past for the F248 F1 (see Kit section) .The difference is only for the diffuser .It will be join to the body cause I haven’t much pics about it.
First of all ,I cut the nose for build the inside Brake Cans and Steering block area and electric connections.I also open in top the steering tube adjustment bay.
After this i Will work on Engine Area….Not so difficult as for 70’s Cars.
I did the front plate inside the nose by brass sheet and worked it by drill and files.
It was soldered to the body.
After this i painted the body with original ferrari paint 2007/2008 and 2k coats .
After this i masked all the red areas with maskol and tapes of different wide.
As bad as boring works…cause the aero parts were mounted before paint as for the real car.
The only things that i Will put in a second moment are the mirrors .I re built the arms by brass.
I decalize with Carbon look decals the engine area and put the foil around Fuel Can.
|
| 1 L A T E S T R E P L I E S (Newest First) |
| F1-Wolfgang |
Posted - 07/16/2010 : 03:16:39
Nice work, except your pics are to small to see what you have done!
Dry to load all pics on Photobucket.
wolfgang |
|
|
|
