| Author |
 Topic  |
|
|
tiz43
Italy
62 Posts |
 Posted - 03/02/2011 : 07:07:00
|
Hello,
I've been starting to modify the kit of Ferrari 330TRI LM produced by BAM Starter.
The body car is in version Le Mans 1963 ( retired ), but I will make the version Sebring 1963( 3th overall and 1st in class ).
The kit was buy on Ebay at ridiculous price, where the body was already painted.
I've looking for picture ( only original car ).
Le Mans configuration.
I've removed all parts in configuration LM, and the object that I will replace with the P/e.
I' ve made the new air intake in front at the rear wheels like Sebring.
Adding a rivets ( head 0,4 mm ) before painting.
Tiziano
|
Edited by - tiz43 on 03/02/2011 13:17:29 |
|
|
tiz43
Italy
62 Posts |
Posted - 03/06/2011 : 09:58:45
|
Hello,
Removed and rebuilt the exhaust pipe whith brass and pond tubes.
Removed the inlet pipes, changed with produced by Feeling.
Removed the padals, changed with produced by Tron.
Removed and change position selector gear, selector and level gear by Tameo.
Steering wheels in P/e by Tron.
Tiziano
|
 |
|
|
ramapao69
Italy
512 Posts |
Posted - 03/06/2011 : 10:30:59
|
| Congratulations!! very good work..... |
|
|
|
43builder
USA
100 Posts |
Posted - 03/06/2011 : 10:41:39
|
Already excited to see the finished result!
Patick Lewis |
|
|
|
tiz43
Italy
62 Posts |
Posted - 03/22/2011 : 03:28:16
|
Thank you guys!
A difficult choice for the wheels, two options: Bosica or Tron wheels.
The Bosica wheels the quality is it the best, but for this car the wheels canal is too wide.
The Tron wheels are less quality, but the wheels canal is it almost like the original.
The result is Tron wheels and Bosica nuts.
Assembled the disk brakes ( from P/e Ilario Kit ) on the axle.
Tiziano
|
|
|
|
tiz43
Italy
62 Posts |
Posted - 04/14/2011 : 12:03:43
|
Rebuilt in turned aluminun the front and rear light, with the bi-component glue mixed with red color filled the hole.
Bad photo of dash board.
Right side.
Tiziano |
|
|
|
360driver
Netherlands
454 Posts |
Posted - 04/14/2011 : 12:08:47
|
| looking very good Tiziano! |
|
|
|
tiz43
Italy
62 Posts |
Posted - 04/17/2011 : 03:15:17
|
Thank you 360, completed tunnel gear box.
Assembled the bottom front light.
Rear light.
Rear mirror.
Tiziano |
|
|
|
tiz43
Italy
62 Posts |
Posted - 06/14/2011 : 13:03:13
|
Hello, I have finally received the rivets and the leather hooks.
I have painted them and glued in the hole.
Painted and assembled the leather hooks.
The result, for me, is good and clean.
Tiziano |
|
|
|
ramapao69
Italy
512 Posts |
Posted - 06/15/2011 : 01:37:08
|
| A really good looking and detailed model is comin' out from your work!! Congratulations |
|
|
|
ferrari10flrb
Netherlands
91 Posts |
|
|
tiz43
Italy
62 Posts |
Posted - 06/21/2011 : 12:47:17
|
Thank you guys, have built in nickel ( painted on black ) the panel behind the seats and glued the roll bar.
I also built in plasticard the doors panels.
Assembled the exaust pipes.
Now is possible complete the model with the last parts.
Tiziano |
|
|
|
ioannis
Greece
494 Posts |
Posted - 06/21/2011 : 13:36:06
|
Excellent built!
Bravo
John |
|
|
|
tiz43
Italy
62 Posts |
Posted - 07/01/2011 : 01:57:40
|
Thank you John, add some detail, sorry for the picture but the camera is not good and I more than the camera to take a picture!!!
Have glued the front lights, that are yellows ( old kit ) but in not a problem because I must cover with decal.
Tiziano |
|
|
|
tiz43
Italy
62 Posts |
Posted - 07/05/2011 : 10:03:48
|
Hello, starting from this air intake of Dino 246 F1 bonnet
I've built the air intake for the left side ( painted on tamiya silver leaf)
Glued on the body
Tiziano |
|
|
| |
Topic |
|
Ferrari 330 TRI LM Sebring 1963 - BAM Starter Kit
